EJOT Multifix SE1000 Seismic

– SE1000 Seismic is an ETA Option 1-approved, two component, high-performance pure epoxy resin for bonding studs, bolts and rebars. Recommended for professional use only.
– SE1000 is ideally suited for demanding and safety critical applications with high load requirements. SE1000 works great in oversized holes with large-diameter studs etc. Extended gel time is convenient when the resin is used in deep boreholes and high ambient temperatures.
– Ideal for post-installed rebar used in structural connections. Suitable for use in waterfilled boreholes, in overhead installations and in diamond drilled boreholes. SE1000 offers exceptionally high chemical resistance.
– Styrene-free, low odor, seismic approval C1 & C2, fire resistance F120, low VOC content A+.
– Store partially used cartridge with mixer on. Reusable until expiry date marked on the product label, if stored properly. Change mixer before reusing. Designated mixing nozzle included with each cartridge.
– Suitable conditions related to stud and rebar material qualities: ZP for dry indoor and temporary outdoor use; HGD/MG and A2 for dry and humid indoor use, outdoor in rural areas only; A4 for indoor, outdoor and industrial use; HCR for extremely corrosive conditions.

Fire behavior test report
For heavy duty applications
Overhead installation
Water-filled drill holes
Fastening without expansion pressure, therefore small edge and center distances possible
Good chemical resistance
Low odor development
High flexural and compressive strength
The cartridge can be used again until the end of its shelf life by replacing the static mixer or by closing it again with the original cap
State-of-the-art ingredients, complies with the latest REACH regulations
100 years service life

Suitable for fastening facades, awnings, wooden structures, metal structures, metal profiles, supports, beams, consoles, railings, grids, sanitary objects, pipelines, cable routes, post-installed rebar applications