PERLIFOC HP Eco+

Perlifoc HP Eco+ has a low density thanks to the use of light fillers, making it a high performance mortar with great benefits. It offers thermal insulation properties, in addition to having the Environmental Product Declaration (EPD).

This mortar provides fire resistance of up to 240 minutes, R240, depending on the structural element to be protected.

Application
Perlifoc HP Eco+ offers a wide range of protection for construction solutions, such as protection of steel structures, concrete structures and composite slab structures.
We recommend that it is applied using a discontinuous spraying machine, as the results are optimal in terms of density and performance.

Our mortar can be applied using a continuous spraying machine, although the density and consumption will be lower. Perlifoc HP Eco+ has a rough appearance. If necessary, it can be smoothed. It can be finished with paint without affecting the fire resistance of the product. Low temperatures should be avoided during its application for effective drying. The application temperature must be between 3 and 43°C, and the substrate temperature during the application must be at least 3°C above the dew point. In enclosed areas with little ventilation (basements, confined spaces, etc.), an RH no greater than 60% and adequate ventilation is recommended for correct drying.